Media Prices

Epson P20000 Inkjet printer

Bond 44″: $ 0.20 per linear inch media
Bond 60″: $ 0.30 per linear inch media
Enhanced Matt 44″: $0.35 per linear inch media
Enhanced Matt 64″: $0.55 per linear inch media
Satin & Glossy 44″: $0.60 per linear inch media
Satin & Glossy 60″: $0.90 per linear inch media
Photo Rag 44″: $1.60 per linear inch media
Photo Rag 60″: $2.05 per linear inch media
Own paper 44″ (= ink only): $ 0.20 per linear inch media
Own paper 60″ (= ink only): $ 0.28 per linear inch media

Note that the ink is included in these prices.

Solvent printer (Epson S70670)

Adhesive Vinyl 54″: $0.70 per linear inch media
Banner 63″: $0.65 per linear inch media
Clear Film 30″: $0.55 per linear inch media
User Supplied Media: no charge for media, $0.61 per square foot ink

Note that the ink is included in these prices.

Chromira

50″ Fuji Maxima $ 5.50 per linear foot
50″Fuji Maxima (for MFA Photo) $ 4.00 per linear foot)

Supplies

Kraft 42×4″ Tube $11 each
Kraft 24×3″ Tube $4.75 each
48″ Glassine $0.02 per cm ($0.61 per linear foot)
60″ Glassine $0.03 per cm ($0.91 per linear foot)

Please Note

I.) You will receive an invoice for the material you used. You will have to pay for all materials, no matter if it was for tests, due to errors – or the final print. However, if there was a problem with the printer and you think you will be unfairly charged, please do the following:

– keep all the prints with the errors, including nozzle checks, etc
– immediately inform the lab staff by sending an e-mail to postimage@concordia.ca
– together we will look at the case, and depending on the circumstances, you will get a reduction in your invoice – or not.
– If you get a reduction, we will ask you to handover the prints you did not pay for, as print samples will help us fixing technical problems

II.) You are expected to operate the equipment yourself. If there is a problem, you also have to be prepared to do some troubleshooting. If the troubleshooting involves paper and ink use which exceeds what you think is part of a regular printing job (or what you think you are willing to pay), please stop and immediately inform the lab staff by sending an e-mail to postimage@concordia.ca

Make sure that you keep all the prints/ nozzle checks. It is much easier to figure out the problem if we have something in hand.